Canoga-perkins 9140 Four-Port SNMP Managed Fast Ethernet Switch Manual de usuario Pagina 92

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 91
B-8
Note: The SLIP IP address should be on a different subnet from your LAN or any other network
interface using TCP/IP Stack. Verify that "Force IP header compression" and "Use default
gateway on remote network" selections are NOT checked.
Step 7 Select "Script" tab. Select "Pop up a terminal window." Click OK.
Step 8 The "Dial-Up Networking" screen should appear at this point with the new properties assigned.
Figure B-11. Script Settings.
Attach a phone line to the modem of the computer and click "Dial" to make the connection with
the remote 9135 or 9140.
Figure B-12. Initialize Dial-Up to Remote
9135 or 9140.
Step 8 Confirm connection. Click "Done." See figure B-13.
Note:
In order to confirm connection to the remote device, open open an MSDOS window, i.e. Windows
"Programs" menu and select "Commands Prompt" and "ping" the device using its SLIP IP
address. To ping the device from the MSDOS screen, type "ping" and the IP address of the device
to ping. Reference Figure B-13.
Formatted
Deleted: e
Deleted: To
Deleted: When the
Deleted: appears
Vista de pagina 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 98 99

Comentarios a estos manuales

Sin comentarios