Canoga-perkins 9140 Four-Port SNMP Managed Fast Ethernet Switch Manual de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
EdgeAccess SNMP Managed Fast Ethernet Switch
Model 9135/9140
4-3
The main functions are the following:
Self-learning Bridge (Enable / Disable Learning)
Spanning Tree Algorithm (Enable / Disable Option)
Address Table Aging
Bridge MIB APIs
4.5 TCP/IP Stack
TCP/IP, SNMP, and TFTP download support are integrated into the optional 9135 Two-Port Switch and
the 9140 Four-Port Switch Manager Module. SLIP is also implemented to support SNMP + IP based
management over a serial line or a modem.
4.6 SNMP Management Agent
In-band SNMP management is possible through any 9135/9140 port or through the out-of-band
management using the modem port.
The following MIBs are supported:
RFC 1213 (MIB II)
RFC 1493 (Bridge MIB)
Private MIB
Traps are created in the following events:
Link Loss
Remote Fault (100BASE-FX ports only)
Authentication
Cold Start
In order to maintain security, the NMS manager host IP address is user-defined. The IP table defines a set
of up to eight network management stations that are allowed to manage the device.
The IP table has the following headings:
Manager IP Address
Access Level
Trap Community
The access level has four levels (1-4):
Level 1: Read only
Level 2: Read - Write
Level 3: Read - Trap
Level 4: Read - Write - Trap
4.7 RMON Probe
RMON Group 1 counters are supported on all ports.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Deleted:
Deleted: Page of 871
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 98 99

Comentarios a estos manuales

Sin comentarios