
5-12
MENU ITEM MINIMUM ACCESS LEVEL
Diagnostics Menu
Redundancy Setting SUPERVISOR
Ping Menu
Ping Address USER
Ping Count USER
Start Pinging USER
Sniffer Settings Menu
Enable Sniffer Mode SUPERVISOR
Sniffer Port SUPERVISOR
Monitored Port SUPERVISOR
5.2.1.5
Network Name
To name a network, choose selection 5 and enter a network name up to 20 characters maximum. Reference
Figure 5-14.
Figure 5-14. Name a
Network.
5.2.1.6
Redundancy Setting
Link Redundancy Setting can be enabled for the EdgeAccess 9140 Four-Port Switch only. This setting can
be set to enabled or disabled under Main Menu, System Screen. See Figure 5-15.
Note: Main and fallback links can only be enabled on Ports 1 and 2 at 100Mbps operation. Port 2 is
always
considered the main link when Backup mode is enabled. This example also assumes optical
interfaces and fiber cable will be used for both main and backup links.
Formatted
Formatted
Deleted:
Deleted: ¶
Deleted:
Deleted: Redundancy Setting can be
enabled for the EdgeAccess 9140 4-Port
Switch only. This setting can be set to
enabled or disabled under Main Menu,
System Screen. See Figure 6-8a.
Comentarios a estos manuales