Canoga-perkins 9145E10G Network Interface Device Hardware Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 55
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
9145E10G Ethernet Network Interface Device User’s Manual Troubleshooting
Loopback Diagnostics
36
5.4.2 Network Mode
Network Mode loops data received on the Network Port Rx through the Local User side to the
Network Port Tx. Data is not sent out the local User Port Tx and incoming data on the local User
Port Rx is ignored (see Figure 5-4). To set this mode, set the Loopback State for the Remote
module to Remote (reference
6913367, 9145E10G NID Software Users Manual).
Figure 5-4. Remote-Remote Loopback Mode
Tx
Rx
Rx
Tx
USER
PORT
NETWORK
PORT
LOCAL DEVICE
Tx
Rx
Rx
Tx
USER
PORT
NETWORK
PORT
REMOTE DEVICE
NO DATA TRANSMISSION
DATA IGNORED
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55

Comentarios a estos manuales

Sin comentarios