Canoga-perkins 9145E10G Network Interface Device Hardware Manual de usuario descargar pdf (Pagina 24)

9145E10G Ethernet Network Interface Device User’s Manual Functional Description

LED Indicators

2.7.2 Data Interface Section LEDs

Table 2-4 represents the indications supplied by the SPD and L/A LEDs of the User, Network,

and Multipurpose ports. Indications apply to both UTP, SFP, and XSP LEDs.

Table 2-4. User and Network Port LED Indicators

POWER

Off Power is off

Green Power is on

Red

One of the board supply voltages has exceeded a

threshold value

STATUS

Off No Power

Green Normal operation

Amber System self-test in progress

Blinking Amber System is booting

Red

One of the board supply voltages has exceeded a

threshold value

* Slow Blinking Green means LED toggles between OFF and GREEN approximately once per

second.

LED Name State Condition

SPD

Off Port Disabled

Green 10GBase Full

Amber System Test

Red Remote Fault

Blinking Red Invalid/Unsupported XFP installed

Slow Blinking Green* Port Enabled but No Link

L/A

Off

No link

No transmit or receive activity

Green Link on with full duplex

Blinking Green Transmission or receiving activity with full duplex

Amber System test

Red

Port Disabled

LLF

Blinking Red No Link, but transmitting OAM packets in unidirectional mode

* Slow Blinking Green means the LED toggles between OFF and GREEN approximately once per

second.

LED Name State Condition

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 54 55

Comentarios a estos manuales

Sin comentarios

Canoga-perkins 9145E10G Network Interface Device Hardware Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Canoga-perkins 9145E10G Network Interface Device Hardware