Canoga-perkins 9145E10G Network Interface Device Hardware Manual de usuario Pagina 42
- Pagina / 55
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
9145E10G Ethernet Network Interface Device User’s Manual Operation
Interface Management
30
Table 4-3. Multipurpose Port LED Indicators
4.2 Interface Management
The 9145E10G is managed locally through the console port and remotely either through the
Management UTP port or inband via the User port. The console port is connected to a VT-100
terminal, using an emulation program, through the RS-232 serial port using a DE-9 cable. UTP is
an out-of-band 10/100 Mbps port supporting Telnet, SSH, and SNMP V1/V2C/V3 that is used for
network management.
4.2.1 Setting Up the VT-100 Terminal
When using the console port, you can use the HyperTerminal Emulation program that is included
with Microsoft Windows operating systems. The Telnet session is only available after the man-
agement TCP/IP configuration is completed.
NOTE: The Microsoft Windows Vista and Windows 7 operating systems do
not include HyperTerminal. If your terminal interface computer
uses Windows Vista or Windows 7, you will need to install a sepa-
rate terminal emulation program.
LED Name State Condition
SPD
Off
10Base T (UTP only)
Auto
Port Disabled
Green 1000Base-T or 1000Base-Fx for SFP port
Amber
100BaseT or 100Base-Fx for SFP port
System Test
Red Remote Fault (SFP Only)
Blinking Red Invalid/Unsupported SFP installed (SFP Only)
Slow Blinking Green* Port Enabled but No Link
L/A
Off
No link
No transmit or receive activity
Green Link on with full duplex
Blinking Green Transmission or receiving activity with full duplex
Amber
System test
Link up with half duplex
Blinking Amber Transmission or receiving activity with half duplex
Red
Port Disabled
LLF
Blinking Red No Link, but transmitting OAM packets in unidirectional mode
* Slow Blinking Green means the LED toggles between OFF and GREEN approximately once per
second.
- 9145E10G 1
- Network Interface Device 1
- Hardware Users Manual 1
- CANOGA PERKINS CORPORATION 2
- CAUTION! 3
- ATTENTION! 3
- General Safety Considerations 4
- Surge Protection 5
- Grounding 5
- Lightning Protection 5
- Operation Temperature 6
- Emissions and Immunity 6
- Special Accessories 6
- Double Pole/Neutral Fusing 6
- Product Disposal Information 7
- Contents 9
- Chapter 1 13
- Introduction 13
- 1.2 9145E10G Specifications 14
- 1.3.1 Rack Mounting 15
- 1.3.2 Wall Mounting 15
- Functional Description 17
- Chapter 2 17
- 2.2 Hardware Configuration 18
- 2.3 Service Data Ports 19
- 2.4 Management Ports 20
- 2.5 Port Default Settings 21
- 2.6 Power Connectors 21
- Power Connectors 22
- 2.7 LED Indicators 23
- 13/(14 Blank) 25
- Chapter 3 27
- Installation 27
- 3.3 Mounting Options 28
- Mounting Options 30
- 3.3.2 Wall Mounting 32
- FRONT OF UNIT 33
- 3.5.1 AC Power 34
- TERMINAL 35
- 3.5.3 Grounding 36
- Chapter 4 39
- Operation 39
- 4.2 Interface Management 42
- Interface Management 43
- Chapter 5 44
- Troubleshooting 44
- LED Name State Condition 45
- 5.3 Running Diagnostics 47
- 5.4 Loopback Diagnostics 48
- 5.4.2 Network Mode 49
- Chapter 6 50
- Maintenance 50
- Check Optical Power Levels 51
Relacionado con productos y manuales para Hardware De La Computadora Canoga-perkins 9145E10G Network Interface Device Hardware
Hardware De La Computadora Canoga-perkins 9145E10G NID Software Version 1.0 Manual de usuario
(116 paginas)
(116 paginas)
Hardware De La Computadora Canoga-perkins 9145EMP Network Interface Device Hardware Manual de usuario
(50 paginas)
(50 paginas)
Hardware De La Computadora Canoga-perkins 9145EMP NID Software Version 3.1 Manual de usuario
(202 paginas)
(202 paginas)
Hardware De La Computadora Canoga-perkins 9145EMP NID Software Version 4.0 Manual de usuario
(229 paginas)
(229 paginas)
Hardware De La Computadora Canoga-perkins 9145ELB NID Software Version 4.01 Manual de usuario
(152 paginas)
(152 paginas)
Hardware De La Computadora Canoga-perkins 9145E Network Interface Device Quick Start Guide Manual de usuario
(7 paginas)
(7 paginas)
Hardware De La Computadora Canoga-perkins 9145EMP Interface Device Quick Start Guide Manual de usuario
(7 paginas)
(7 paginas)
Hardware De La Computadora Canoga-perkins CanogaOS Command Reference Manual de usuario
(855 paginas)
(855 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales