Canoga-perkins 9145E10G Network Interface Device Hardware Manual de usuario descargar pdf (Pagina 23)

Functional Description 9145E10G Ethernet Network Interface Device User’s Manual

LED Indicators

2.7 LED Indicators

The following paragraphs describe the functions of the LED indicators (see Figure 2-9) on the

9145E10G base unit.

Figure 2-8. LED Indicators

2.7.1 Management Section LEDs

Table 2-3 provides the indications supplied by the L/A, SPD, POWER and STATUS LEDs,

located to the right of the Ethernet Management and Console ports.

Table 2-3. LED Indicators

LED Name State Condition

L/A

Off

No link

No transmit or receive activity

Green Link on with full duplex

Blinking Green Transmission or receiving activity with full duplex

Amber

System Booting

Link on with half duplex

Blinking Amber Transmission or receiving activity with half duplex

SPD

Off Port Disabled

Green 10GBASE full

Amber System Test

Red Remote Fault

Blinking Red Invalid/Unsupported XFP installed

Slow Blinking Green* Port Enabled but No Link

LINK/ACTIVITY LED

SPEED LED

POWER LED

STATUS LED

LINK/ACTIVITY LED

SPEED LED

SPEED LED (-527 ONLY)

LINK/ACTIVITY LED (-527 ONLY)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 54 55

Sin comentarios

Canoga-perkins 9145E10G Network Interface Device Hardware Manual de usuario Pagina 23