Canoga-perkins CanogaOS Configuration Guide Manual de usuario descargar pdf (Pagina 88)

CanogaOS Configuration Guide

Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 88 of 350

DUT (config-if)#exit Exit the Interface mode

DUT(config)#interface eth-0-17 Specify the interface (eth-0-17)to be

configured and enter the Interface

mode

DUT(config-if)# switchport mode trunk Set the switching characteristics of

this interface to trunk mode.

DUT(config-if)# switchport trunk allowed vlan all Enable all VLAN IDs on this port.

DUT (config-if)# no shutdown Bring up the interface.

DUT (config-if)#exit Exit the Interface mode

DUT (config)#ethernet cfm enable Enable CFM globally.

DUT (config)#ethernet cfm cc level 3 vlan 30 interval 10000 Configure the interval in the selected

service instance (MA) instance with

the configured domain-level.

DUT (config)#ethernet cfm cc enable level 3 vlan 30 Enable continuity check in the

selected service instance (MA)

instance with the configured

domain-level.

DUT(config-if)# end Exit the Interface mode.

Bridge3

DUT# configure terminal Enter the Configure mode.

DUT(config)# vlan database Enter the VLAN database..

DUT(config vlan)# vlan 30 Configure VLAN 30

DUT(config vlan)# exit Exit the VLAN mode

DUT(config)# ethernet cfm domain customer level 5 Create a domain,

DUT (config-ether-cfm)#service cst vlan 30 Define a Maintenance Association

(MA) for the domain created.

DUT (config-ether-cfm)#exit Exit the CFM database.

DUT(config)# ethernet cfm domain provider level 3 Create a domain,

DUT (config-ether-cfm)#service cst vlan 30 Define a Maintenance Association

(MA) for the domain created.

DUT (config-ether-cfm)#exit Exit the CFM database.

DUT(config)#interface eth-0-9 Specify the interface (eth-0-9)to be

configured and enter the Interface

mode

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 349 350

Sin comentarios

Canoga-perkins CanogaOS Configuration Guide Manual de usuario Pagina 88