Canoga-perkins CanogaOS Command Reference Manual de usuario descargar pdf (Pagina 395)

100

101

CanogaOS Command Line Reference Revision 1.02

Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 395 of 855

19.24.1.6 Related Commands

19.25 set origin

Use this command to set the BGP origin code.

Use the no parameter with this command to delete an entry.

The origin attribute defines the origin of the path information. The three parameters with this

command indicate three different values. IGP is interior to the originating AS. This happens if IGP

is redistributed into the BGP. EGP is learned through an Exterior Gateway Protocol. Incomplete is

unknown or learned through some other means. This happens when static route is redistributed in

BGP and the origin of the route is incomplete.

To use the set origin command, you must first have a match clause. Match and set commands set

the conditions for redistributing routes from one routing protocol to another. The match command

specifies the match criteria under which redistribution is allowed for the current route-map. The set

command specifies the set redistribution actions to be performed, if the match criteria are met.

If the packets do not match any of the defined criteria, they are routed through the normal routing

process.

Note:

This command is valid for BGP only.

19.25.1.1 Command Syntax

set origin { egp | igp | incomplete }

no set origin

19.25.1.2 Syntax Description

egp

Specifies a remote EGP system.

igp

A local IGP system.

incomplete

Specifies a system of unknown heritage.

19.25.1.3 Command Mode

Route-map mode

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 854 855

Comentarios a estos manuales

Sin comentarios

Canoga-perkins CanogaOS Command Reference Manual de usuario Pagina 395

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Canoga-perkins CanogaOS Command Reference