Canoga-perkins CanogaOS Command Reference Manual de usuario descargar pdf (Pagina 393)

100

101

CanogaOS Command Line Reference Revision 1.02

Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 393 of 855

19.22.1.6 Related Commands

19.23 set metric

Use this command to set a metric value for a route.

Use the no parameter with this command to disable this function.

This command sets the metric value for a route, and influences external neighbors about the

preferred path into an Autonomous System (AS). The preferred path is the one with a lower

metric value. A router compares metrics for paths from neighbors in the same ASs. To compare

metrics from neighbors coming from different ASs, use the /jointfilesconvert/1661109/bgp always-compare-med command.

To use the set metric command, you must first have a match clause. Match and set commands

set the conditions for redistributing routes from one routing protocol to another. The match

command specifies the match criteria under which redistribution is allowed for the current

route-map. The set command specifies the set redistribution actions to be performed, if the

match criteria are met.

If the packets do not match any of the defined criteria, they are routed through the normal

routing process.

Note:

This command is valid for BGP, OSPF and RIP only.

19.23.1.1 Command Syntax

set metric METRICVAL

no set metric

19.23.1.2 Syntax Description

METRICVAL <+/-metric>|<0-4294967295> The metric value.

19.23.1.3 Command Mode

Route-map mode

19.23.1.4 Defaults

No set metric is specified by default.

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 854 855

Comentarios a estos manuales

Sin comentarios

Canoga-perkins CanogaOS Command Reference Manual de usuario Pagina 393

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Canoga-perkins CanogaOS Command Reference