Canoga-perkins 9155 Network Interface Device Manual de usuario descargar pdf (Pagina 34)

4. To return to the Switch Configuration menu, press <Esc>.

VLAN CONFIGURATION

VLAN ID NAME TYPE

1. 1 Default Default

1. View/Change Vlan :

2. List From Vlan :

3. VLAN ID Translation :

4. VLAN Priority Translation :

5. Create Vlan :

6. Delete Vlan :

7. Configure Port Vlan :

Figure 27. VLAN Configuration Screen

Table 9. VLAN Configuration Screen Options

Option Description

1. View/Change Vlan Select a VLAN to view in detail

2. List From Vlan Select number to start list of VLANs

3. VLAN ID Translation Set up ID translation table

4. VLAN Priority Translation Set up priority by PBit

5. Create Vlan Enter ID for new VLAN; select other options to set up other

parameters as needed

6. Delete Vlan Select a VLAN number to remove

7. Configure Port Vlan Set up VLAN characteristics for a port; includes participation

and tagging

4.6.6 GVRP Configuration and Information

Use the GVRP Information screen to view and set GVRP parameters for the 9155. See Figure 28. To

access the GVRP Information screen, follow these steps:

1. From the Switch Configuration menu, type 6, "GVRP Configuration," and press <Enter>.

2. At the GVRP Configuration menu, type the number for an item and press <Enter>, then press

<Space> to cycle through the options and press <Enter> to select an option.

Use the View/Change Interface option to set the mode and timer parameters for a specific port.

9155 Network Interface Device

4-18

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Sin comentarios

Canoga-perkins 9155 Network Interface Device Manual de usuario Pagina 34