Canoga-perkins 9155 Network Interface Device Manual de usuario descargar pdf (Pagina 30)

A small test network

Spanning Tree from source (C)

Figure 20. Typical Spanning Tree Application.

Note: For details on the Spanning Tree Algorithm, see the IEEE 802.1 specifications.

4.6.1 Global Spanning Tree Parameters

Use the Global Spanning Tree Parameters menu to set various STP parameters for the 9155 within the

network. See Figure 21 and Table 8. To access the Global Spanning Tree Parameters menu, follow

these steps:

1. From the Switch Configuration menu, type 1, "Global Spanning Tree Parameters," and press

<Enter>.

2. At the Global Spanning Tree Parameters menu, type the number for an item and press <Enter>,

then follow the prompts.

3. To return to the Switch Configuration menu, press <Esc>.

GLOBAL SPANNING TREE PARAMETERS

1. Admin Mode : disabled

2. Version : 802.1s

3. Configuration Name : 00-40-2A-12-34-00

4. Configuration Revision : 0

5. Priority : 32768

6. Hello Time (sec) : 2

7. Forward Delay (sec) : 15

8. Max Age (sec) : 20

9. View/Change Interface :

10. Main Menu

Figure 21. Global Spanning Tree Parameters Menu

9155 Network Interface Device

4-14

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

Sin comentarios

Canoga-perkins 9155 Network Interface Device Manual de usuario Pagina 30