Canoga-perkins CanogaView Smart Element Manager Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
CanogaView
®
Smart Element Manager
2.2.11 Enter SNMP Trap Port
The "Enter SNMP Trap Port" screen allows the selection of a port number on which the
CanogaView Trap Service should listen for SNMP traps. The default port for this installation
is 163 and as explained on the installation screen, unless other network management
software uses this port, the default port should be selected.
Figure 2-12: Enter SNMP Port Trap
Standalone Version
15
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Comentarios a estos manuales

Sin comentarios