Canoga-perkins 9161 Network Interface Device Manual de usuario descargar pdf (Pagina 36)

LATENCY/JITTER TEST

Test IP Address 172.16.150.1

Test Duration 07:00

Round Trip Packets 720

Dropped Packets 0

Minimum Latency (ms) 7.087695 Minimum Jitter (ms) 0.001435

Average Latency (ms) 8.004562 Average Jitter (ms) 0.076897

Maximum Latency (ms) 11.85647 Maximum Jitter (ms) 1.289573

1) Test IP Address : 172.16.2.72

2) Duration (second) : 55

3) Size of packet : 32

4) Start Test

5) Stop Test

6) Main Menu

Figure 34. Latency/Jitter Test Screen

Table 10. Latency/Jitter Test Definitions

Alarm Description

1) Test IP Address Where the 9161 sends the packets

2) Duration (second) How long to run the test

3) Size of packet How big each packet should be, from 40 to 1472 bytes

4.9.2 PING

Use the PING Generation screen to test the connection to a specific IP address. See Figure 35.

PING

1. Ping Address : 0.0.0.0

2. Ping Count : 0

3. Ping Size : 0

4. Start Pinging

5. Main Menu

Figure 35. PING Generation Screen

To use PING to check a connection, follow these steps:

1. From the Main Menu, type

5, "Diagnostics," and press <Enter>.

2. At the PING menu prompt, set the PING parameters, and press <Enter>.

"PING response received..." indicates a good connection;

"TIMEOUT: Unable to reach [IP address]..." indicates a faulty connection.

3. To stop the PING, press <Esc>.

9161 Network Interface Device

4-20

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Sin comentarios

Canoga-perkins 9161 Network Interface Device Manual de usuario Pagina 36