Canoga-perkins 9161 Network Interface Device Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 54
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
9161 Network Interface Device
2-3
Table 1. 9161 Management LEDs
LED Status Description
Off No power/power supply not installed
Green Normal operation
Amber System self-test
P1 (Primary) or
P2 (Secondary) Power
Red Power failure/Major alarm
Green Normal operation
Amber System self-test/one fan failed
Red More than one fan failed
Fans
Red blinking Fan not installed
Off No power
Green Normal operation
Green blinking Management traffic
Amber System self-test/over-temperature
Amber blinking Management traffic with over-temperature
Management
Red Diagnostic or CPU failure
Table 2. 9161 Interface LEDs
LED Status Description
Off No transmission activity
Green blinking Transmission activity
Amber System self-test
TX
Red Port disabled; may be due to Link Loss Forwarding (LLF)
Off No link
Green Link established
Green blinking Receiving activity
Amber System self-test
RX
Red Receiving Remote Fault
Off Non-network connection
Green Network connection
NET
Amber System self-test
Alarms
The 9161 can generate Traps and Major and Minor Alarms. For details about the Traps Log and
setting up notification, see Chapter 4.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Comentarios a estos manuales

Sin comentarios