Canoga-perkins 9175 Command Reference Manual de usuario descargar pdf (Pagina 662)

100

101

CanogaOS Command Reference

39-9

39.12 tar xtract

To display files in the tar file, use the tar table command in Privileged EXEC mode.

Command Syntax

tar xtract tar-file destination-directory

tar-file The file name of the tar file.

destination-directory The destination directory.

Command Mode

Privileged EXEC

Usage

The destination-directory must exist in the flash:. You can use mkdir to create a new directory.

Examples

The following shows an example to extract a tar file named tar1 into a directory name dir1:

Switch# tar xtract tar1 dir1

Related Commands

tar create

tar table

39.13 copy running-config

To save current configuration, use the copy running-config command in Privileged EXEC mode.

Command Syntax

copy running-config {startup-config | destination-name | ftp://address/destination-name |

tftp://address/destination-name}

startup-config Save current configuration to starup-config file, which the switch will use

when system starts up.

destination-name Save current configuration to a specified file.

ftp://address/ Save current configuration to a specified ftp server.

tftp://address/ Save current configuration to a specified tftp server.

Command Mode

Privileged EXEC

Usage

The exact format of the source and destination URLs varies according to the file or directory location.

You may enter a particular file or a filename that follows the standard file system syntax

(filesystem:[/filepath][/filename]).

1 2 ... 657 658 659 660 661 662 663 664 665 666 667 ... 789 790

Comentarios a estos manuales

Sin comentarios

Canoga-perkins 9175 Command Reference Manual de usuario Pagina 662

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Canoga-perkins 9175 Command Reference