Canoga-perkins 9145EMP Network Interface Device Hardware Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
9145EMP Network Interface Device Hardware User’s Manual Installation
Mounting Options
18
Figure 3-1 Unpacking the 9145EMP
3.3 Mounting Options
The 9145EMP can be rack mounted, wall mounted, or placed on any horizontal flat surface such
as a shelf or table.
3.3.1 Rack Mounting
One 9145EMP can be mounted in either a 19" rack or a 23" rack, and two 9145EMPs can be
mounted side by side in either a 19" rack or a 23" rack. Rack mounting kits (Table 3-1) are avail-
able for each of the four rack mounting possibilities. Each rack mount kit contains the brackets
necessary for installing the 9145EMP (Figure 3-2), as well as the mounting hardware required to
attach the brackets to the unit(s). Rack mount screws are provided by the rack manufacturer.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Comentarios a estos manuales

Sin comentarios