Canoga-perkins 9145 Network Interface Device Manual de usuario descargar pdf (Pagina 13)

9145 Network Interface Device

2-1

Figure 5 – Bracket Attachment Detail

• Wall mounting: The 9145 has slotted holes on the bottom of the unit for wall

mounting. The 9145 requires 1” unobstructed space above and below the 9145

for ventilation. Canoga Perkins recommends a space of 5” on the right and 3” on

the left of 9145 bee left unobstructed to facilitate Interface Module Access, Cable

Access and Power Entry.

a. Install two #10 or #12 screws and anchors in the wall 9 3/8” apart, 1” from the

sides and 3/4” from the top of the desired location of the 9145. A template is

illustrated below. Leave the screws protruding from the wall 3/8” to 3/4”.

b. Hang the 9145 on the screws, matching the keyholes in the 9145 to the screws.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 107 108

Sin comentarios

Canoga-perkins 9145 Network Interface Device Manual de usuario Pagina 13